2018 Ski-Doo Freeride® Electric PowderMax 2.5 FlexEdge Rotax® 850 E-TEC® REV Gen4 S LEV

2018 Ski-Doo Freeride® Electric PowderMax 2.5 FlexEdge Rotax® 850 E-TEC® REV Gen4 S LEV 146

The new Freeride 146 sled's agility makes it majorly versatile, appealing to those who want to push themselves in a variety of terrains and snow conditions. Available with E-TEC SHOT Starter.

• ROTAX 850 E-TEC ENGINE

The most powerful 2-stroke engine in the industry.* It pumps out 10 more horsepower (165 hp) than its predecessor, but its responsiveness is what really shines. With the new pDrive primary clutch, it’s 30% quicker responding than the 800R E-TEC giving you the instant control you demand.

*Observed HP measured on internal dyno test in optimal conditions for 2-stroke engines.

• E-TEC SHOT ENGINE STARTER

Push-button starting with almost no added weight. After an initial pull-start, the engine charges an ultracapacitor. Pushing the handlebar SHOT button for subsequent starts uses energy stored in the ultracapacitor to turn the magneto into an electric motor that rotates the flywheel, and with E-TEC technology, starts the engine. Eliminates nearly 20 lb. (9 kg) compared to conventional electric start. SHOT starting is only possible with Ski-Doo-exclusive E-TEC technology.

• PDRIVE CLUTCH

A major factor in the quickness of REV Gen4 sleds is the new pDrive clutch. Fast and friction-free dual rollers transfer torque in place of traditional sliding buttons on this 100% new clutch. The oversize rollers with needle bearings, wide flyweights and shaft-on-shaft design emphasize smooth operation and long life. Ultra-responsive shifting, impressive RPM consistency and 2.8 lb./ 1.3 kg lighter than the TRA VII.

• REV Gen4 PLATFORM

Key to the Freeride’s agility is the extreme mass centralization of the 4th generation REV platform. The 850 E-TEC engine is compact and centered between the skis, making the vehicle easy to roll. The trademark pyramidal frame, new die-cast aluminum front suspension module and new heat exchanger design ensure it’s strong, yet lightweight.

• KYB PRO SHOCKS

These shocks are standard on the MXZx 600RS race sled - so you know they're extremely capable and durable for control in the toughest conditions. Remote reservoir design for performance and they are a rebuildable/revalvable. Easy Adjust compression damping knob does not require tools; rebound adjustments are standard as well.

• RS RUNNING BOARDS

Designed for aggressive stand-up riding, they are flatter for most of their length, wider and strong. Thicker aluminum sheet (3 mm vs. 1.8 mm), plus front and rear reinforcements to withstand tough landings.

• RAS 3 FRONT SUSPENSION

Similar geometry and steering to the RAS 3 mountain front end for capability and light steering feel on- and off-trail. Optimized for crossover usage, two ski stance positions dial in handling: 40.1 in. (102 cm) or 38.4 in. (97.5 cm).

• TMOTION REAR SUSPENSION

The tMotion flexes laterally, reducing the effort to initiate a roll, due to a ball joint at the center hinge between the rear arm and drop link and split flat-tube front arms. Very progressive motion ratio makes the ride on trails even more comfortable.